Friday, February 19, 2016

New Product from Sirio - P5000 LED , Performer 2000, Gain-Master Half Wave..

More Exciting product from Sirio:
Performer 5000 LED - light up when you TX
Performer 2000 -- High power Handling, slick design
Gain Master Half Wave - 500W continuous, 1000W PEP

Stay tuned for more update soon!

Wednesday, December 2, 2015

Sirio “The Fighter Series”

Coming to soon, the Sirio Fighter Series CB/10m antenna!

For this new series Sirio took some popular long CB antennas like:
• Performer 5000 3/8×24 without Shaft
• Performer 5000 3/8×24 with Shaft
• Performer 5000
• Performer 5000PL

The specs are quite similar but the look is totally different. Instead of the standard grey coils you know get a ‘MILITARY’ or ‘CAMO’ look for these CB antennas.
For those who drive a military vehicle or those active in airsoft activities these antennas are a great gadget.
It is a limited edition, so if you want to have some FIGHTER fun, act now.

Tuesday, July 28, 2015

New Production from RM Italy: RM Italy HBF1000 Low Pass Filter, 1000 watts, 1.8-55 Mhz

The New RM Italy HBF1000 Low Pass Filter will be available at the end of November!
1.8-55 Mhz Automatic low pass filter, 1000 Watts, it's designed to be used with a radio or
amplifier to reduce the unwanted harmonics.

Friday, May 15, 2015

RM Italy HLA 305v Plus Review by AB4OJ -- Adam Farson

We are in booth EH0641 and EH0642 at Dayton Hamvention 2015 , and RM Italy HLA 305v Plus HF Linear Amplifier Review is out: RM Italy HLA 305v Plus Linear Amplifier Review, it was  by VA7OJ/AB4OJ (Adam Farson), check out his site:

Monday, April 20, 2015

Quick Feedback from VA7OJ/AB4OJ (Adam) On RM Italy HLA 305v Plus HF Linear Amplifier

Another Excellent Feedback from VA7OJ/AB4OJ (Adam) on RM Italy HLA 305v HF Linear Amplifier:

can't wait to read his full report on HLA 305v soon, check out his site:

Thursday, April 16, 2015

RM Italy LA 250 VHF Linear Amplifier Review on Eham

Please read the latest review on the LA250 VHF linear Amplifier:

Here is the full link on eham:

Friday, February 13, 2015

The 2 Tones IMD DR for RM Italy HLA 305v Linear Amplifier

The comments below are made by "Amateur Radio hobby enthusiasts and well known contesters and DXers  IK4AUY and I4LEC in Italy"  --   Both are not affiliated with RM Italy

Source URL:

The 2 tones IMD TX DR test you found below in HAMRADIOWEB forum for the RM
Italy HLA 305  HF Linear Amplifier was made by 2 tones audio (700Hz and 1900Hz) modulating on SSB mode a brand new Kenwood TS-590SG HF transceiver and its low power out leveled also with audio mic gain  (since the minimum nominal power output from that transceiver is around 5 watts,  too much drive in some middle - lower freq bands, into the RM Italy HLA 305 input,  so IMD is of the whole system).

I4LEC captured the spectrum on air while IK4AUY was transmitting to him with

RM Italy HLA 305 with I4LEC Apache Lab SDR ANAN-10 transceiver which can display real time spectrum.

RM Italy HLA 305 is one of the new models of the "Ham oriented" Power Amplifier line, as 10W out of the ANAN-10 alone sure not enough for the 80m Long Path, I thought to give it a try by placing the HLA 305 on the line.

To get 200W continuous serving it takes just under 2W up to a little over 4W of driving power, this to cover the Ham bands from 160 to 10 meter.

Several contacts were made on CW and phone, with good quality emission reported on this latest mode.

Matter of fact just the day before on 10m, I happened to talk to IK4AUY while he was using the HLA 305 and made a capture of his signal spectrum, which shows excellent attenuation of IMD3 (-38dBc).

However, this finding was also confirmed in the laboratory at the power of 200W. Here are some pictures of the set-up, where an inside view could not be missed, even though this may did cost us the warranty.





thanks again for your availability to the on air tests carried out at your qth where I could view live your sdr ANAN-10, a quite interesting equipment too.

In my qth I tried HLA 305 throughout December 2014 with my TS-590SG set for a minimum power out,  really with around 5 Watts it could be obtained easily, from HLA 305, the power of about 200WPEP in SSB mode with good spectral behavior,  as I carried out  2 Tones IMD TX tests and I  verified the IMD which is very important in SSB mode,  while this is not an issue on  CW mode where you can get up to a maximum between 230-250W in several amateur radio bands.
A slightly less gain, as it is normal, on 10 meters the highest freq band, for which it takes about 10 watts for about 200W out.   With a trx type like Apache Lab ANAN-10 (10W),  Elecraft  KX3 (10W),  TEN-TEC mod 539 Argonaut VI (10W) or  Elad  sdr FDM DUO (max 5-8W),    Flex-1500 (5W),  Yaesu FT-817 (5W), or any transceiver that allows you to adjust the power between less than 5Watts and 10-14Watts, the combination allows for a power output  level of 200-250W that enable you to make QSOs with almost any countries in the world, at a low total cost.  Of course you get  SSB better linearity at levels below 200W.

Before the “on air” testing at Clay  QTH,  thanks to the loan from RM-Italy, which I have really to thank you for the opportunity given to us to be able to make both laboratory and on air tests at my QTH,  I could use it extensively with the special call  II4CDN allowed for 50years anniversary of  Medicina (Bologna)  Radio Telescope.  With the combination of TS-590SG and HLA 305  I have made, in December alone, more than 2 thousand QSOs.  I would say a good test on air. Here below the picture of my friend Clay, I4LEC, in his fine equipped ham radio shack (antennas and QTH position are so nice as well), you can see also:


1) the console as a well known Master  DJ  of  Contests and DX, joking apart, the console is  very useful to use with SDR receivers and  SDR transceivers, already matched together with a Flex-1500  now with an ANAN-10 trx by Clay.

2) the blanket lying on the glorious IC775 (improved with the  rx mods roofing filter by I4SBX) still contends  the scene in the contests  as well together with the new SDR represent a very interesting combination.
The massive object in the corner, Claudio says that is too noisy, so he is evaluating the
advantages of a more compact amplifier .... Until next time, 73 de Sergio, IK4AUY.

For those who appreciate and like to see also the laboratory tests, with data visible in a
graphical format, so immediate and not commented by  many words, here I provided several images I captured with Marconi spectrum analyzer and a Bird RF coupler, on a Bird 50 Ohm  dummy load, the two tones test  is not performed directly at RF, but by injecting two audio tones into the microphone input of TS-590SG transceiver as driver (an audio level such that the ALC instrument reading  not moving at all, or very little, to calibrate the input power level to HLA 305 amplifier in order to have a given power output measured in PEP with the accurate vector wattmeter LP-100A, to simulate the real situation of my station:
-20meters band  with level out at 100WPEP, 150WPEP, 200WPEP
-harmonics spectrum with fundamental in 20meters band
-10meters  100WPEP comparable with the situation viewed from  Clay I4LEC ANAN-10  above.

-IMD 2Tone   of my TS-590SG output alone at level Pin input used to get 200W Pout to understand what was the starting IMD behavior at the amplifier input.

The attenuation of the  intermodulation responses  read directly as the difference between one
of the two carrier signals and the IMD itself, in dBc is the measure under  the so called "Military Standard A",  while  if to this dB data is added,  improved by 6dB (absolute) this one become the (more relaxed) commercial standard that  you usually see reported in the sales brochures  for a correct comparison.
In detail on this aspect  see the recall footnotes found in my article on Radio Rivista radio magazine April 2000, :
The standard measure of the IMD are:

a) in dB of attenuation in reference to each of the two equal tones desired, according to the
Military Standard (Mil-Std-1131 Version A - test method 2204B) 

b) in dB of attenuation in relation to the peak power of amplifier, pep, in the test with  two equals tones, according to the standard commercial EIA, followed by the majority of manufacturers of amateur radio equipment and as well  by ARRL laboratory in their tests of new equipment (Source: Test procedures manual - ARRL).

Following the latter method it gives  a value in dB of IMD response better by  6 dB since IMD is referenced to the pep level  of the two tones  which is  just 6 dB greater than the power of each tone, (eg. -30 dB. In the case a) is equivalent to -36 dB in case b).  In practice, the direct reading of the spectrum analyzer is carried out, with this standard, sliding vertically the two tones equal to a level of the screen positioned 6 dB below the zero reference, rather than 'on zero as in the case a) .  

73 de Sergio, IK4AUY.

    RM Italy HLA 305 -- 20 meter TX 2T IMD, 100W PEP Out (TS-590SG Pin 1.6 W PEP)


    RM Italy HLA 305 -- 20 meter TX 2T IMD, 150W PEP Out (TS-590SG Pin 2.5 W PEP)

    RM Italy HLA 305 -- 20 meter TX 2T IMD, 200W PEP Out (TS-590SG Pin 4 W PEP)

    RM Italy HLA 305 20 meter 200W Fundamental and Harmonics Spectrum

here is the image IMD DR 2T relative to 10 meters 100WPEP I forgot to attach the post above,

here I added the 40meters and 80meters to 200WPEP Pout.  Sergio, IK4AUY.

                         TS590SG 2T IMD 20 meter, Pout, 4W PEP

    RM Italy HLA 305 -- 10 meter TX 2T IMD, 100W PEP Out (TS-590SG Pin 4.7 W PEP)

    RM Italy HLA 305 -- 40 meter TX 2T IMD, 200W PEP Out (TS-590SG Pin 2.5 W PEP)

     RM Italy HLA 305 -- 80 meter TX 2T IMD, 200W PEP Out (TS-590SG Pin 2.2W  PEP)

RM HLA 305v Input and Output Charts -- by IK4AUY Dec 2014
RM Italy HLA 305v Linear Amplifier, SN310314
Voltage = 13,80, H (without input attenuator)
Digital Vector RF Wattmeter LP-100A
50 Ohm Bird Wattmeter LP-100A

A) 10 Meter Test with RM Italy HLA 305v Linear Amplifier

Pin (W) Pout (W) - 10m
1 21
2 46
3 70
4 92
5 115
6 134
7 153
8 161
9 173
10 182
11 186
12 190
13 196

B) 12 Meter Test with RM Italy HLA 305v Linear Amplifier

Pin (W) Pout (W) - 12m
1 81
2 142
3 187
4 215
5 226
6 237
7 245
8 258
9 247
10 252
11 253

C) 15 Meter Test with RM Italy HLA 305v Linear Amplifier

Pin (W) Pout (W) - 15m
1 68
2 127
3 171
4 202
5 225
6 242
7 249
8 254
9 255
10 255
11 255

D) 17 Meter Test with RM Italy HLA 305v Linear Amplifier

Pin (W) Pout (W) - 17m
1 75
2 140
3 188
4 219
5 233
6 233
7 233
8 222
9 220
10 214
11 205

E) 20 Meter Test with RM Italy HLA 305v Linear Amplifier

Pin (W) Pout (W) - 20m
1 67
2 127
3 168
4 200
5 222
6 241
7 251
8 259
9 263
10 265
11 266
F) 30 Meter Test with RM Italy HLA 305v Linear Amplifier

Pin (W) Pout (W) - 30m
1 98
2 176
3 215
4 220
5 237
6 239
7 239
8 239
9 243
10 249
11 240

G) 40 Meter Test with RM Italy HLA 305v Linear Amplifier

Pin (W) Pout (W) - 40m
1 72
2 137
3 192
4 231
5 253
6 259
7 263
8 263
9 263
10 263
11 263

F) 80 Meter Test with RM Italy HLA 305v Linear Amplifier

Pin (W) Pout (W) - 80m
1 89
2 166
3 225
4 263
5 272
6 277
7 277
8 277
9 277
10 277
11 277

F) 160 Meter Test with RM Italy HLA 305v Linear Amplifier

Pin (W)
Pout (W) - 160m
1 82
2 150
3 210
4 235
5 246
6 248
7 248
8 248
9 248
10 248
11 248

Summary Input & Output for 160meter to 10 meter for RM Italy HLA 305v:

The above comments are made by "Amateur Radio hobby enthusiasts and well known contesters and DXers  IK4AUY and I4LEC in Italy"   --  Both are not affiliated with RM Italy"
Source URL: